Intended Use: To protect the user’s arms from scattered secondary radiation originating from the X-ray beam during fluoroscopic procedures by providing an attenuating barrier to radiation. They are not intended for use in direct or primary X-ray beams. They are also not intended to protect from abrasions, cuts, tears, punctures, and heat/fire. The RR sleeves are ideal where the user needs protection from ionizing radiation during various types of procedures such as General X-Ray & Fluoroscopy, Radiography, Neuroradiology, Urology, MRI, CT, Radiotherapy and Nuclear Medicine.
The RR Sleeve is intended to be used in conjunction with radiation attenuating gloves.

Compliance Requirements: ASTM D5151, ASTM D6124, ASTM D412, ASTM F2547, EN ISO 374-1:2016, EN ISO 374-5:2016, EN 421:2010 (excl. clause 4.3) EN 420:2003 + A1:2009
Biocompatibility Compliance: ISO 10993, ASTM F 719 and ASTM F 720

Storage: Store sleeves in a cool, dry and ozone-free place (below 35°C). Keep out of direct sunlight. Care should be taken to avoid sharp objects as punctures will allow radiation to pass to the wearer.

Disposal: The Proguard RR Sleeve contains lead and should be disposed of through hazardous waste procedures in accordance with local laws and regulations. The material should not be disposed of by incineration and use of self-contained breathing apparatus is recommended if the sheeting is ignited by fire.

Expiration: This is a sterilized product and expiration is set at 3 years from manufactured date per FDA requirement. his Indication may be found on the label on the original external packaging and indicates the period of time during which the device, sterilized with Ethylene Oxide, may be used as long as it has been stored properly in suitable conditions and has intact packaging.